Máy đo tổng chất rắn hòa tan TDS Hanna HI 983306

( 0 Votes)
(Lượt xem : 320 )
Thông tin chi tiết

Máy đo tổng chất rắn hòa tan TDS Hanna HI 983306

HI 983306 Pronto 0 to 19.99 μS/cm TDS Meter 10 mg/L resolution is no longer available.

Hãng sản xuất: HANNA

Xuất xứ: Romania

Model: HI983306

Giá: Liên hệ 0977.459.400

 

The Hanna Instruments HI 983306-01 Pronto 0 to 19.99 µS/cm TDS Meter 10 mg/L resolution is a water resistant TDS meter is the result of customer requests for accurate, affordable process monitoring with low maintenance. The Hanna Instruments HI 983306 is supplied with a direct 2-pin probe and 2 m (6.6') cable with a 1/2" thread for flow-thru mounting. The Hanna Instruments HI 983306 's probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. The Hanna Instruments HI983306 can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time.

 

Range   0 to 1990 ppm (mg/L)
Resolution   10 ppm
Accuracy   ±2% F.S.
Calibration   manual, 1 point through trimmer
Calibration Solution   HI 70032
Temperature Compensation   automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
Setpoint   200 to 1600 ppm
Alarm   red LED blinks when measured value differs from set point more than ±100 mg/L (ppm)
Probe   HI 7634/2 with 2 m (6.6') cable and ½" thread
(included)
Power Supply   12 Vdc power adapter (included)
Environment   0 to 50°C (32 to 122°F); RH max 100%
Dimensions   86 x 110 x 43 mm (3.4 x 4.3 x 1.7")
Weight   215 g (7.6 oz.)