Máy đo độ dẫn điện EC Hanna HI 983307-02

( 0 Votes)
(Lượt xem : 419 )
Thông tin chi tiết

Bút đo độ dẫn điện EC Hanna HI 98307-02

Thiết bị đo độ dẫn điện

Hãng sản xuất: HANNA

Xuất xứ: Romania

Model: BL 983307-02

Pronto EC meter, resolution: 0.01 mS/cm Range: 0.00 to 9.99 mS/cm, 230V

Giá: Liên hệ 0977.459.400

 

The HI 983307-02 conductivity meter is Hanna's reply to requests for accurate, affordable process monitoring with low maintenance.

 

This meter is supplied with a direct 2-pin probe and 2m cable with a ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C.

 

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. EC can be installed anywhere quickly and easily with the casings moulded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 Vdc power supply allows continuous monitoring over extended periods of time.

Product uses

  • Demineralised water
  • Deionised water


Key features

  • Water resistant
  • Continuous EC monitoring
  • Visual LED alarms


Supplied with

  • HI-7632/2 EC/TDS probe
  • Calibration screwdriver
  • 12 VDC adapter and instructions

 

Range   0.00 to 9.99 mS/cm
Resolution   0.01 mS/cm
Accuracy   ±2% F.S.
Calibration   manual, 1 point through trimmer
Calibration Solution   HI 70039P
Temperature Compensation   automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
Setpoint   0.70 to 3.50 mS/cm
Alarm   red LED (blinks when measurement differs from setpoint by:
±0.2 mS/cm
Probe   HI 7632/2 with 2 m (6.6') cable and ½" thread
(included)
Power Supply   12 Vdc power adapter (included)
Environment   0 to 50°C (32 to 122°F); RH max 100%
Dimensions   86 x 110 x 43 mm (3.4 x 4.3 x 1.7")
Weight   215 g (7.6 oz.)