Test Kit Clo tự do Hanna HI 38018

( 0 Votes)
(Lượt xem : 241 )
Thông tin chi tiết

Test Kit Clo tự do thang đo thấp và trung Hanna HI 38018

Hãng sản xuất: Hanna

Xuất xứ: Romania

Giá: Liên hệ 0977.459.400

HI38018 Free Chlorine Low and Medium Range Test Kit

The HI38018 is a chemical test kit that uses the DPD method to measure free chlorine in the low and medium range. The HI38018 is supplied complete with all of the reagents and equipment necessary to perform approximately 200 tests.
Pre-made reagents for ease of use
All reagents marked with expiration date and lot number for traceability
Checker® disc for more accurate determination

Details

The HI38018 is a chemical test kit that determines the free chlorine concentration in two ranges: 0.00 to 0.70 mg/L and 0.0 to 3.5 mg/L. The HI38018 is supplied with all of the necessary reagents and equipment to perform the analysis, including the Checker® disc for accurate determination. The test kit contains enough reagents for perform approximately 200 tests.
Features at-a-glance
Complete setup
All required materials are included with the test kit, such as the glass vials, plastic pipette, reagent packets, and Checker® disc.
High resolution
Readings from 0.00 to 0.70 mg/L are determined to 0.02 mg/L resolution.
Readings from 0.0 to 3.5 mg/L are determined to 0.1 mg/L resolution.
Replacement reagents available
There is no need to buy a new kit when reagents are exhausted. The HI38018-200 can be ordered to replace the reagents supplied with the kit.

Significance of Use

Disinfection is a process of killing disease-causing organisms (or pathogens). Chlorine (Cl2) is a very desirable disinfectant because, when mixed with pure water, it reacts to form hypochlorous acid (HOCl) and hydrochloric acid (HCl). HOCl (free active chlorine) is the most effective form of chlorine for disinfection of pools, spas, and drinking water.

Drinking water municipalities add elemental chlorine to the water supply as chlorine gas, liquid sodium hypochlorite, or dry calcium hypochlorite. In water these form free chlorine ions, which destroy disease-causing pathogens, reduce odor, eliminate bacteria and help to remove unwanted elements. The USEPA requires that residual disinfectant is present in finished drinking water to ensure there is disinfectant available throughout the distribution system, with chlorine acting as one of the disinfectants that provides said residual. However, the EPA has also set a maximum contaminant level of 4.0 mg/L for free chlorine due to potential health effects above this level.

Specifications

Range 0.00 to 0.70 mg/L (ppm); 0.0 to 3.5 mg/L (ppm)
Resolution 0.02 mg/L (0.00 to 0.70 mg/L range), 0.1 mg/L (0.0 to 3.5 mg/L range)
Method DPD
Number of Tests 200
CTK Type Checker Disc
Weight 647 g
Ordering Information HI38018 test kit comes with HI93701-0 free chlorine reagent (200 packets), demineralizer bottle with cap for 12 L, checker disc, glass vials with caps (2) and 3 mL plastic pipette.